41A4373A LiftMaster Garage Door Opener Safety Sensor Kit

• Compatible with LiftMaster and Chamberlain Brand  chain drive openers 1993 thru 1997.
• Includes sensors only - no brackets.
• Each sensor has a green light and a bolt that runs right through the center of each sensor.
• Each sensor shown has approximately 18" of wire attached.  Designed to splice into your existing wires.  Wire connectors included.
• "Recommended Surge Protection when replacing safety sensors or circuit boards".

41A5034WB LiftMaster Garage Door Opener Safety Sensor Kit (New Style)

• Compatible with LiftMaster and Chamberlain Brand  chain drive openers 1997 thru current.
• Includes new style brackets and sensors.
• Each sensor shown has approximately 18" of wire attached.  Designed to splice into your existing wires.  Wire connectors included.
• "Recommended Surge Protection when replacing safety sensors or circuit boards".

41A5034 LiftMaster Garage Door Opener Safety Sensors ONLY

• Compatible with LiftMaster and Chamberlain Brand  chain drive openers 1997 thru current.
• Includes sensors only - no brackets.
• One green light and one yellow light.
• Each sensor shown has approximately 18" of wire attached.  Designed to splice into your existing wires.  Wire connectors included.
• Fits 41A5266-1 brackets pictured below.
• Will NOT fit brackets that the 41A4373A Sensors use.
• "Recommended Surge Protection when replacing safety sensors or circuit boards".

41A5266-1 LiftMaster Garage Door Opener Safety Sensor Brackets for Snappy Sensors

• Compatible with LiftMaster and Chamberlain Brand  Security+ garage door openers 1997 thru current.
• For use with 41A5034 Style Sensors ONLY.

41A5281 Liftmaster Chamberlain Sears Craftsman Garage Door Opener Extension Brackets for 41A5266-1 Snappy Brackets

• Allows for flexibility in installation of 41A5266-1 snappy brackets.

41B4115 LiftMaster Garage Door Opener Pigtail Connectors

• Used to replace plug connectors on old style sensors.
• Includes one pair.

41B873 LiftMaster Garage Door Opener Safety Sensor Sun Shields

• LiftMaster, Chamberlain, Sears Craftsman, and Chamberlain brand garage door opener safety sensor sun shields.
• These safety sensor sun shields are used to prevent sunlight from shining into sensor causing accidental reversal of garage door.
• ONLY compatible with 41A5266-1 safety sensor brackets pictured above.
• Includes one pair.

CBRACKET LiftMaster Chamberlain Sears Craftsman Safety Sensor Brackets

• For 41A4373A safety sensors - shown above.
• Includes 1 pair of brackets and fasteners.
• Will also work with CPS and CPS-L sensors - shown below.

CPS-L LiftMaster Commercial Door Operator Protector System

• For use with models CPS, CPSll and CPS-L.
• Direct connect commercial protector system for Logic Control.
• Provides protection for doors up to 30ft. wide.
• For use with the Logic Control Board Version 2 only.
• If using multiple sets of photo eyes on one Logic operator, use CPS-L for lowest position and CPS for every other position.
• For use on LiftMaster commercial door operators only.
• Includes emitter, receiver, mounting brackets, "C" wrap, wire, necessary hardware, and installation manual.

CPS LiftMaster Commercial Door Operator Protector System

• Commercial Protector System provides protection on doors up to 30 feet wide.
• For use on LiftMaster commercial door operators only.
• Provides protection for doors up to 30ft. wide.
• Includes emitter, receiver, mounting brackets, "C" wrap, wire, operator interface, fasteners, and installation instructions.

41K4629 LiftMaster Protector System Interface Box

• Replacement Interface Box.
• Used with CPS Protector Systems.
• Included with CPS Protector System - shown above.
• For use on LiftMaster and Link commercial door operators only.